# openHistorian 2.0 Utilities **URL:** \ **Category:** openHistorian\ **Created:** [March 23, 2017, 6:01pm UTC](http://discussions.gridprotectionalliance.org/t/openhistorian-2-0-utilities/141 "2017-03-23T18:01:24Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![JM\_JORGE](http://discussions.gridprotectionalliance.org/letter_avatar_proxy/v4/letter/j/90ced4/32.png) [@JM\_JORGE](http://discussions.gridprotectionalliance.org/u/JM_JORGE)\ **Post date:** [March 23, 2017, 6:01pm UTC](http://discussions.gridprotectionalliance.org/t/openhistorian-2-0-utilities/141/1 "2017-03-23T18:01:24Z")
How to launch from openHistorian 2.0 Utilities like: - Data Trending Utility - Data Extraction Utility Rgds João ---
**Author:** ![StephenCWills](http://discussions.gridprotectionalliance.org/user_avatar/discussions.gridprotectionalliance.org/stephencwills/32/20_2.png) [@StephenCWills](http://discussions.gridprotectionalliance.org/u/StephenCWills)\ **Post date:** [March 24, 2017, 5:58pm UTC](http://discussions.gridprotectionalliance.org/t/openhistorian-2-0-utilities/141/2 "2017-03-24T17:58:15Z")
For trending and extraction of data in the openHistorian 2.0, you can use the built-in web tool that is designed to plot data and export to COMTRADE or CSV. You can use the following URL to reach it, though you will have to replace “historian-server” with the hostname of the server that the openHistorian is installed on. [http://historian-server:8180/TrendMeasurements.cshtml](http://historian-server:8180/TrendMeasurements.cshtml) From there, you will need to select data points on the `Select Points` tab. Select your time range by switching to either the `Trend Data` tab or `Export Data` tab for trending or data extraction respectively. ---
**Author:** ![cignacio6](http://discussions.gridprotectionalliance.org/letter_avatar_proxy/v4/letter/c/fbc32d/32.png) [@cignacio6](http://discussions.gridprotectionalliance.org/u/cignacio6)\ **Post date:** [April 12, 2017, 1:01pm UTC](http://discussions.gridprotectionalliance.org/t/openhistorian-2-0-utilities/141/3 "2017-04-12T13:01:50Z")
Hello, How is the resolution for the CSV Data? Is possible 20ms? ---
**Author:** ![ritchiecarroll](http://discussions.gridprotectionalliance.org/user_avatar/discussions.gridprotectionalliance.org/ritchiecarroll/32/2_2.png) [@ritchiecarroll](http://discussions.gridprotectionalliance.org/u/ritchiecarroll)\ **Post date:** [April 12, 2017, 8:50pm UTC](http://discussions.gridprotectionalliance.org/t/openhistorian-2-0-utilities/141/4 "2017-04-12T20:50:11Z")
Certainly. Time in the historian itself is stored in ticks, i.e., 100-nanosecond intervals. The web based CSV exporter exports time as a string in milliseconds, so you can get down to 1/1000 of a second in the CSV files currently - but this could be easily adjusted for higher resolutions. ---
**Author:** ![brad](http://discussions.gridprotectionalliance.org/user_avatar/discussions.gridprotectionalliance.org/brad/32/222_2.png) [@brad](http://discussions.gridprotectionalliance.org/u/brad)\ **Post date:** [January 4, 2018, 6:32pm UTC](http://discussions.gridprotectionalliance.org/t/openhistorian-2-0-utilities/141/5 "2018-01-04T18:32:41Z")
So this is probably a dumb question but how do I start whatever hosts the web tool? When I first installed open historian I was able to navigate to localhost:8180 and navigate the page without issues. Since I’ve restarted my computer I can’t seem to figure out how to start up the service again. ---
**Author:** ![ritchiecarroll](http://discussions.gridprotectionalliance.org/user_avatar/discussions.gridprotectionalliance.org/ritchiecarroll/32/2_2.png) [@ritchiecarroll](http://discussions.gridprotectionalliance.org/u/ritchiecarroll)\ **Post date:** [January 4, 2018, 6:50pm UTC](http://discussions.gridprotectionalliance.org/t/openhistorian-2-0-utilities/141/6 "2018-01-04T18:50:04Z")
Service should automatically run - you might make sure service is actually running (Control Panel / Administrative Tools / Services - look for openHistorian) ---
**Author:** ![brad](http://discussions.gridprotectionalliance.org/user_avatar/discussions.gridprotectionalliance.org/brad/32/222_2.png) [@brad](http://discussions.gridprotectionalliance.org/u/brad)\ **Post date:** [January 4, 2018, 9:36pm UTC](http://discussions.gridprotectionalliance.org/t/openhistorian-2-0-utilities/141/7 "2018-01-04T21:36:01Z")
I started a new topic for this. I found a workaround fix. > [@Open Historian - Web Service does not run automatically](http://discussions.gridprotectionalliance.org/t/open-historian-web-service-does-not-run-automatically/263): > > Outlined below is my problem and my work around. There has to be a better way so if you know of one please speak up. I installed open historian 2 just fine and was able to use a web browser connected to ‘localhost:8180’ just fine. After I restarted my computer I could not successfully navigate to ‘localhost:8180’. I tried launching all the applications under start–\> OpenHistorian but nothing enabled me to browse ‘localhost:8180’ Here is my fix. Start menu → OpenHistorian → Configuration Setup…